Powermatic TS29 User Manual

Instruction Manual & Parts ListM-0460270(800) 274-6848www.wmhtoolgroup.comSPINDLE SHAPERModel TS29This Manual is Bookmarked

105. Secure the machine to the floor with good qual-ity lag screws through the holes in the bottom of thecabinet.6. Exposed metal parts such as the ta

11FIGURE 12INTERCHANGEABLE SPINDLEINSTALLATIONOne of the features of this machine is that it will ac-cept interchangeable spindles with a drawbar or w

124. Disengage spindle lock before operating.NOTE: Whenever possible, the cutter should be posi-tioned on the spindle in such a way that the cut isbe

13FIGURE 19MITRE GAUGE & CLAMPMount mitre gauge and clamp to the sliding table asfollows (Figure 19):1. Insert post (A) of the clamp assembly down

14ADJUSTMENTSControl Panel InstructionsThe elements of the control panel are as follows:(See Figure 24).A. power indicatorB. on-off switchC. forwar

15The cutting speed should always exceed 40 m/s tolessen risk of kickback but should not exceed 70 m/sto lessen the risk of tool damage.To change the

16SPINDLE TILTINGThe machine should come to a complete stop beforethe spindle is tilted, and the insert with the oval slotshould be placed into the ta

17SLIDING TABLE ADJUSTMENTThere are six adjustable eccentric rollers (A) on thesliding table, shown in Figure 31. Wherever the tableis unstable or no

18POSITION OF COLLARSWhen shaping with collars, the collar must have suffi-cient bearing surface, as shown in Figure 35. Alsothe work must be fairly

19COPYING (MACHINING WITH A JIG)When using the same procedure on multipleworkpieces, a jig or template can be made to facilitatethe operation:1. Prepa

Warranty & ServiceWMH Tool Group warrants every product it sells. If one of our tools needs service or repair, one of our Autho-rized Repair Stat

20The bearings in the motor are sealed for life and do notrequire lubrication.The spindle bearing should be lubricated every 200hours of use by using

21Trouble-Shooting for Model TS29 ShaperPROBLEM POSSIBLE CAUSE SOLUTION [with page #]Machine will not start. 1. Faulty switch. 1. Replace switch.2. Co

22Trouble-Shooting for Model TS29 ShaperPROBLEM POSSIBLE CAUSE SOLUTION [with page #]Depth of cut not uniform. 1. Misalignment. 1. Adjust outfeed fenc

23Parts List: Fence Assembly (TS29 Shaper)No. Part No. Description

24No. Part No. Description Quantity57 TS29-037 Retaining Ri

25Fence Assembly (TS29 Shaper)

26Parts List: Spindle Assembly (TS29 Shaper)No. Part No. Description

27Spindle Assembly (TS29 Shaper)

28Parts List: Cabinet Assembly (TS29 Shaper)No. Part No. Description

29Cabinet Assembly (TS29 Shaper)

TABLE OF CONTENTSSafety Rules ...

30Parts List: Sliding Table Assembly (TS29 Shaper)No. Part No. Description

31Sliding Table Assembly (TS29 Shaper)

32Parts List: Speed Indicator (TS29 Shaper)No. Part No. Description

33Speed Indicator (TS29 Shaper)

34Parts List: Electrical Components (TS29 Shaper)No. Part No. Description

35Electrical Components (TS29 Shaper)

36Parts List: Quill Assembly (TS29 Shaper)No. Part No. Description

37No. Part No. Description Quantity55 TS29-177 Handwheel ...

38Quill Assembly (TS29 Shaper)

39Electrical Schematic (TS29 Shaper)To order parts or reach our service department, please call our toll-free number between 7:30 a.m. and 6:00 p.m.(

4As with all machines, there is a certain amount of hazard involved with the use of this shaper. Use themachine with the respect and caution demanded

CWMH TOOLGROUP2 4 2 0 V a n t a g e D r i v eElgin, IL 60123Phone: (800) 274-6848Website: www.wmhtoolgroup.com POWERMATIC ALL RIGHTS RESE

5Short stock. Never shape stock less than 12 inches in length without special fixtures. Where practical, shapelonger stock and cut to size.12 inch r

6Health hazards. Some dust created by power sanding, sawing, grinding, drilling and other constructionactivities contains chemicals known to cause c

7 SAFETYFamiliarize yourself with the location and content of these safety decals on your shaper.!FIGURE 4WARNINGDO NOT ENGAGESPINDLE LOCK WHILE

8Motor ......TEFC 7.5HP, 3Ph, 230/460V, 60HzStarter ...

9UNPACKINGOpen shipping container and all separate cartons con-taining accessories. Report any damage immediatelyto your distributor. Read the instr