Powermatic JTG-10Q User Manual

Operating Instructions and Parts Manual Tenoning Jig Model: JTG-10Q WMH TOOL GROUP 2420 Vantage Drive Elgin, Illinois 60123 Part No. M-7

10 6. If it is necessary to cut a tenon on the side of the workpiece that is against the fence, a wood spacer must be secured between the workpiece

11 Parts List Index No. Part No. Description Size Qty 1 ...JTG10-1 ...Locking Lever...

12 Exploded View

2 This manual has been prepared for the owner and operators of a JTG-10Q Tenoning Jig. Its purpose, aside from machine operation, is to promote safe

3 Table of Contents Warranty...

4 Warnings 1. Read and understand the entire owners manual before attempting assembly or operation. 2. Read and understand the warnings in this ma

5 blah blah blah 21. Make your workshop child proof with padlocks, master switches or by removing starter keys. 22. Give your work undivided atten

6 Shipping Contents Open shipping carton and check that all parts are intact. Report any damage immediately to your distributor. Read the instruction

7 Assembly Refer to Figure 1. 1. Insert the handwheel assembly (F) into the clamp bracket (B) and secure with the lock handle (A) on the clamp bracke

8 4. Using a square (A, Fig. 3), check to see if the position of the backstop (D) is 90 degrees to the saw table. If not, loosen the lock handle

9 10. To prevent the fence from being pushed, or moved, into the blade, loosen the nut (N) on the setscrew and turn the setscrew clockwise until i