Powermatic 60HH User Manual download pdf (Page 21)

Operating Controls

Start/Stop

Power Indicator Light – The start switch has a

power indicator lamp which is on whenever

there is power connected to the Jointer, not

just when the Jointer is running. Do not assume

that no light means there is no power to the

machine. If the bulb is bad, there will be no

indication. Always check before use.

Do not rely that no light

means no power to the machine. Always

check for power first. Failure to comply may

cause serious injury!

Refer to Figure 30:

Start – Press the green start switch.

When power is connected to the machine, the

green light is always on regardless of whether

the Jointer is running or not.

Stop – Press the red switch to stop.

Reset – In the event that the Jointer stops

without pressing the stop button, as the result of

a tripped fuse or circuit breaker, etc.:

Press red button to reset main switch.

Press the green button to restart the machine.

Safety Key

The start/stop switch on the Jointer comes

equipped with a magnetic safety key. When in

place on the switch as shown in Figure 30, the

magnetic safety key trips a relay which will allow

the machine to start and stop when the

respective switches are pressed. Being

magnetic, the lock can be removed to make the

machine inoperable and can be hidden for safe

storage by attaching it to another magnetic

surface.

When using the Jointer, place the key on the

switch cover lining up the arrow on the key with

the REMOVE arrow on the cover. Then rotate

the key so that the arrow lines up with the LOCK

arrow on the cover. This will prevent the safety

key from coming loose from vibration when the

machine is in use.

Figure 30

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 43 44

Comments to this Manuals

No comments

Powermatic 60HH User Manual Page 21

Comments to this Manuals

Related products and manuals for Unknown Powermatic 60HH