Powermatic 66 User Manual download pdf (Page 6)

Introduction

This manual is provided by WMH Tool Group covering the safe operation and maintenance procedures

for a Powermatic Model 66 Table Saw. This manual contains instructions on installation, safety

precautions, general operating procedures, maintenance instructions and parts breakdown. This machine

has been designed and constructed to provide years of trouble free operation if used in accordance with

instructions set forth in this manual. If there are any questions or comments, please contact either your

local supplier or WMH Tool Group. WMH Tool Group can also be reached at our web site:

www.wmhtoolgroup.com.

Specifications

Model number........................................................................................................................................66

Maximum motor size.........................................................................................................5HP, 3600 RPM

Table size with standard extensions (L x W)(in.)....................................................................... 37-1/2 x 28

Table size without extension (L x W)(in.).................................................................................. 21-1/2 x 28

Rip fence (L x W x H)(in.)................................................................................................41-3/4 x 4 x 2-1/2

Arbor diameter (in.)...............................................................................................................................5/8

Saw blade diameter (in.)........................................................................................................................10

Maximum speed of 10” saw blade (SFM) ........................................................................................ 11,000

Blade tilt maximum (deg.) ......................................................................................................................45

Maximum depth of cut (in.).......................................................... 3-1/8 at 90-degrees; 2-1/8 at 45-degrees

Maximum cut to right of saw blade with standard extension (in.).............................................................25

Maximum width of cutoff in front of saw in 1” stock (in.)..........................................................................15

Maximum width of cutoff in front of saw in 3-1/8” stock (in.)..............................................................12-1/4

Maximum diameter of dado (in.)...............................................................................................................8

Maximum width of dado cut (in.)........................................................................................................ 13/16

Drive belts ....................................................................................................................3VX (two required)

Table height to floor (in.)........................................................................................................................34

Dust port diameter (in.) ............................................................................................................................4

Shipping weight with motor, fence and rails (lbs.) .................................................................................614

The above specifications were current at the time this manual was published, but because of our policy of

continuous improvement, WMH Tool Group reserves the right to change specifications at any time and

without prior notice, without incurring obligations.

1 2 3 4 5 6 7 8 9 10 11 ... 39 40

Comments to this Manuals

No comments

Powermatic 66 User Manual Page 6

Comments to this Manuals

Related products and manuals for Power saws Powermatic 66