Powermatic TS29 User Manual download pdf (Page 14)

ADJUSTMENTS

Control Panel Instructions

The elements of the control panel are as follows:

(See Figure 24).

A. power indicator

B. on-off switch

C. forward/reverse switch

D. start indicator

E. emergency stop

1. Make certain the spindle lock is disengaged as

explained in the section "Spindle Lock" and that the

cabinet door is closed. Be sure there is no conflict

with the cutterhead, and that any bystanders are clear

of moving parts.

2. Rotate the forward/reverse switch (C) to the de-

sired setting. Rotate the start switch (B) to the right to

start the machine. The start switch is magnetic; as

soon as the machine is started, the switch will return

to the center position as shown.

WARNING: Never attempt to reverse the

rotation of the spindle while the motor/

spindle is running.

3. To stop the machine, push the mushroom shaped

stop button (E) or turn the start/stop switch (B) to the

left.

CAUTION: Do not use the forward/reverse

switch to stop the machine or damage to

the electrical controls will occur.

WARNING: Open the electrical cabinet door

only while the power is disconnected, or it

may result in electrical shock.

SPEED CHANGE

Your machine is supplied with a 5-step motor pulley

and a 5-step spindle pulley that provide spindle speeds

of 3000, 4000, 6000, 8000 and 10000 RPM.

A speed chart, shown in Figure 25, is located on the

inside of the front cabinet door for easy reference of

the belt position on the pulleys for the five speeds avail-

able.

Check machine speed setting before operating. Make

sure cutter meets or exceeds speed rating of tool.

Figure 26 shows a chart for finding optimum speed

range in relation to the cutter size. A similar chart can

be seen on the front of the shaper, with indicator lights

showing the current speed of rotation.

FIGURE 24

FIGURE 25

FIGURE 26

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 39 40

Comments to this Manuals

No comments

Powermatic TS29 User Manual Page 14

Comments to this Manuals

Related products and manuals for Power tools Powermatic TS29