Powermatic TS29 User Manual download pdf (Page 9)

UNPACKING

Open shipping container and all separate cartons con-

taining accessories. Report any damage immediately

to your distributor. Read the instruction manual thor-

oughly for assembly, alignment, maintenance and

safety instructions.

Crate contents:

1 shaper

1 fence assembly

1 dust chute

1 mitre gauge and clamp assembly

1 aluminum fence

1 box of standard accessories (see above)

INSTALLATION AND ASSEMBLY

Tools required

crane with hoist; or forklift

9/16", 7/16" and 1/2" wrenches

1. Remove all wood crating from around the shaper.

2. Remove the bolts securing the machine to the

skid.

3. The shaper can be lifted by a crane with hoist

(Figure 6), or by a forklift (Figure 7), either of which

should be capable of lifting one ton. Remove the skid

from under the shaper.

4. The shaper should be mounted to a solid, level

foundation, preferably a concrete floor. With machine

in position, check table surface left to right and front

to back with a machinist's level. If necessary, place

metal shims under the corners of the machine to en-

sure it is level.

FIGURE 5

FIGURE 6

Standard Accessories

(Figure 5)

A. Spindle Nut Wrench

B. Spindle Wrenches

C. Open-end Wrenches

D. Hex Wrenches

E. Spindle Collet

F. Spindle Nut

G. Lock Nut

H. Draw Bar

J. Grease Gun

K. Table Inserts

L. Interchangeable

Spindles

FIGURE 7

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 39 40

Comments to this Manuals

No comments

Powermatic TS29 User Manual Page 9

Comments to this Manuals

Related products and manuals for Power tools Powermatic TS29